This module describes settings that are required for the resolution of
boundaries on a subelement level.
These boundaries are represented by polynomials, and a nodal sampling in
elements intersected by the boundary needs to be done accordingly.
For subresolution to work, there needs to be a subresolution table
defined, indicating at least the polynomial degree to use for polynomial
representations.
Only boundaries with a color (not the 'none' color), can be subresolved.
For each color a separate file will be generated to contain the
polynomial information on all the subresolved elements of this color.
Note, that polynomial settings are global, all boundaries will be resolved
with the same polynomial definition.
Nodal values are obtained, by refining elements further down and probing
integration points for their in or out status. This detaches the
actual polynomial somewhat from the mesh resolution, and the number of
levels to resolve beyond the target element can be stated independently
of the polynomial degree.
However, the subresolution levels should be set sufficiently high to
provide a good resolution for the integration points.
module~~sdr_subresolution_module~~UsesGraph
module~sdr_subresolution_module
sdr_subresolution_module
aot_table_module
aot_table_module
module~sdr_subresolution_module->aot_table_module
aotus_module
aotus_module
module~sdr_subresolution_module->aotus_module
env_module
env_module
module~sdr_subresolution_module->env_module
flu_binding
flu_binding
module~sdr_subresolution_module->flu_binding
module~ply_prj_header_module
ply_prj_header_module
module~sdr_subresolution_module->module~ply_prj_header_module
module~sdr_subres_fills_module
sdr_subres_fills_module
module~sdr_subresolution_module->module~sdr_subres_fills_module
ply_dof_module
ply_dof_module
module~sdr_subresolution_module->ply_dof_module
ply_dynarray_project_module
ply_dynarray_project_module
module~sdr_subresolution_module->ply_dynarray_project_module
tem_aux_module
tem_aux_module
module~sdr_subresolution_module->tem_aux_module
tem_dyn_array_module
tem_dyn_array_module
module~sdr_subresolution_module->tem_dyn_array_module
tem_logging_module
tem_logging_module
module~sdr_subresolution_module->tem_logging_module
tem_tools_module
tem_tools_module
module~sdr_subresolution_module->tem_tools_module
module~ply_prj_header_module->aotus_module
module~ply_prj_header_module->env_module
module~ply_prj_header_module->tem_aux_module
module~ply_prj_header_module->tem_logging_module
module~ply_prj_header_module->tem_tools_module
aot_out_module
aot_out_module
module~ply_prj_header_module->aot_out_module
fftw_wrap
fftw_wrap
module~ply_prj_header_module->fftw_wrap
module~ply_fpt_header_module
ply_fpt_header_module
module~ply_prj_header_module->module~ply_fpt_header_module
module~ply_fxt_header_module
ply_fxt_header_module
module~ply_prj_header_module->module~ply_fxt_header_module
module~ply_l2p_header_module
ply_l2p_header_module
module~ply_prj_header_module->module~ply_l2p_header_module
module~sdr_subres_fills_module->aot_table_module
module~sdr_subres_fills_module->aotus_module
module~sdr_subres_fills_module->env_module
module~sdr_subres_fills_module->flu_binding
module~sdr_subres_fills_module->tem_aux_module
module~sdr_subres_fills_module->tem_dyn_array_module
module~sdr_subres_fills_module->tem_logging_module
module~sdr_subres_fills_module->tem_tools_module
tem_grow_array_module
tem_grow_array_module
module~sdr_subres_fills_module->tem_grow_array_module
module~ply_fpt_header_module->aotus_module
module~ply_fpt_header_module->env_module
module~ply_fpt_header_module->tem_aux_module
module~ply_fpt_header_module->tem_logging_module
module~ply_fpt_header_module->tem_tools_module
module~ply_fpt_header_module->aot_out_module
module~ply_nodes_header_module
ply_nodes_header_module
module~ply_fpt_header_module->module~ply_nodes_header_module
tem_compileconf_module
tem_compileconf_module
module~ply_fpt_header_module->tem_compileconf_module
tem_float_module
tem_float_module
module~ply_fpt_header_module->tem_float_module
module~ply_fxt_header_module->aotus_module
module~ply_fxt_header_module->env_module
module~ply_fxt_header_module->tem_aux_module
module~ply_fxt_header_module->tem_logging_module
module~ply_fxt_header_module->aot_out_module
module~ply_fxt_header_module->module~ply_nodes_header_module
module~ply_fxt_header_module->tem_float_module
module~ply_l2p_header_module->aotus_module
module~ply_l2p_header_module->env_module
module~ply_l2p_header_module->tem_aux_module
module~ply_l2p_header_module->tem_logging_module
module~ply_l2p_header_module->tem_tools_module
module~ply_l2p_header_module->aot_out_module
module~ply_l2p_header_module->module~ply_nodes_header_module
module~ply_l2p_header_module->tem_float_module
module~ply_nodes_header_module->env_module
Nodes of different colours represent the following:
Graph Key
Module
Module
Submodule
Submodule
Subroutine
Subroutine
Function
Function
Program
Program
This Page's Entity
This Page's Entity
Solid arrows point from a submodule to the (sub)module which it is
descended from. Dashed arrows point from a module or program unit to
modules which it uses.
module~~sdr_subresolution_module~~UsedByGraph
module~sdr_subresolution_module
sdr_subresolution_module
module~sdr_config_module
sdr_config_module
module~sdr_config_module->module~sdr_subresolution_module
module~sdr_flooding_module
sdr_flooding_module
module~sdr_flooding_module->module~sdr_config_module
module~sdr_prototree_module
sdr_protoTree_module
module~sdr_flooding_module->module~sdr_prototree_module
module~sdr_boundary_module
sdr_boundary_module
module~sdr_flooding_module->module~sdr_boundary_module
module~sdr_proto2treelm_module
sdr_proto2treelm_module
module~sdr_proto2treelm_module->module~sdr_config_module
module~sdr_proto2treelm_module->module~sdr_prototree_module
module~sdr_proto2treelm_module->module~sdr_boundary_module
module~sdr_prototree_module->module~sdr_config_module
module~sdr_refinept_module
sdr_refinePT_module
module~sdr_refinept_module->module~sdr_config_module
module~sdr_refinept_module->module~sdr_prototree_module
program~seeder
seeder
program~seeder->module~sdr_config_module
program~seeder->module~sdr_flooding_module
program~seeder->module~sdr_proto2treelm_module
program~seeder->module~sdr_prototree_module
program~seeder->module~sdr_refinept_module
module~sdr_boundary_module->module~sdr_prototree_module
Nodes of different colours represent the following:
Graph Key
Module
Module
Submodule
Submodule
Subroutine
Subroutine
Function
Function
Program
Program
This Page's Entity
This Page's Entity
Solid arrows point from a submodule to the (sub)module which it is
descended from. Dashed arrows point from a module or program unit to
modules which it uses.
Derived Types
Settings for the resolution below mesh elements.
Components
Type
Visibility Attributes
Name
Initial
public
::
polydegree
Degree for the polynomials to use in the subelement resolution.
public
::
polyspace
Identification of the polynomial space to use.
public
::
projection
Definition of conversions between modal and nodal values.
type(ply_prj_header_type ),
public
::
project_header
Header definition of the projection header.
Read more…
public
::
nLevels
Number of levels to use for the resolution of boundaries within elements.
Read more…
dyn_labelarray_type ),
public
::
default_colors
Dynamic array to store the color names, for which the default boundary
resolution should reach subelements.
Read more…
sdr_subres_fills_type ),
public
::
color_values
Definition of the values to use for color filling and color voids.
public,
allocatable
::
value_pos (:)
Position of value definitions for each color in the mesh.
Subroutines
Loading the settings for the subresolution in the mesh.
Arguments
Type
Intent Optional Attributes
Name
sdr_subresolution_type ),
intent(out)
::
subres
The subresolution data structure to fill.
flu_State )
::
conf
Handle to the Lua configuration script.
intent(in),
optional
::
parent
Handle to a possible parent table.
Internal subroutine to load the list of colors, which by default should
apply subelement resolution to its boundaries.
Read more… Arguments
Type
Intent Optional Attributes
Name
dyn_labelarray_type ),
intent(out)
::
label
Labels of the colors, for which a default setting is given.
flu_State )
::
conf
Handle for the Lua script.
intent(in)
::
parent
Parent table, within which to open the color_default table.
Find the value definitions for all unique colors.
Arguments